Equipment use:
This machine consists of soft to hard sheet laminating, using CCD automatic registration, all kinds of soft to hard for touch screen laminating process, such as: OCA + LCM, COVER + FILM.
Size 3.5 to 7 inches, processing device adopts CCD visual registration system automatic registration method, precision of + / - 0.1 mm, it can realize accurate registration, to ensure product joint yield.
Equipment technical parameters:
Equipment power supply: AC380V / 16 a 50 hz 1500 w
Working pressure: 0.4-0.8 Mpa
Pressing product size: 3.5 to 7 inches (line length is less than 100)
Workbench operation mode: the CCD automatic registration
For laminating precision: "+ / - 0.1 mm
Pressing size: 3.5 inch
Parameter setting: industrial computer control parameter modification
Table size: 160 * 240 mm
Equipment failure rate: 2% or less
Equipment capacity (C/T: cycle time) : 15 SEC / 1 PCS, equipment operation time operating time 98% or higher
Product qualified rate: 98% or greater (incoming bad excluding them)
Pressing pressure: 0.05-0.05 Mpa
Pressing time setting: 0.1-99.0 Sec
Equipment size: 975 * 1152 * 1152 mm
Weight: about 900 kg
